DUTIES AND RESPONSIBILITIES:
- The Production Supervisor - Smalls supervises the fillets, strips and wings (Smalls) production lines in the Poultry Department of the Distribution Centre, ensuring that output benchmarks and yield targets are achieved and that all product is produced to Pedros specification. The role controls specification compliance, line control, yield tracking, supplier claims, cold chain, hygiene and knife control, and leads the Smalls Team Leaders, cutters and packers on the floor
- Ensure fillets are cut and trimmed to specification: 100g to 120g trimmed weight, 6mm to 8mm thick and ~140mm diameter (10mm tolerance), cut to fit the bun
- Ensure strips are cut to specification: 7cm to 8.5cm long, 2cm to 2.5cm wide and 14g to 20g, with tenderloins and undersized top halves cut into strips, not wasted
- Ensure the tenderiser is used on the shiny side only, fillets are placed horizontally before flattening, and the flattener gap is set to 5mm and tested on 10 fillets before production
- Control the fillets and strips line: no more than 50kg out of the cold room at a time, 3 separate lugs per cutter and lugs never filled above the rim
- Ensure average fillet pack weight stays within 1kg to 1.2kg and the benchmark of 1 000 fillet packs per 7.5-hour shift is achieved at full capacity
- Ensure wings are drained, trimmed of excess fat and skin, packed 20 per bag with none under 65g, and the benchmark of 1 100 wing packs per shift is achieved at full capacity
- Ensure 350ml of marinade below 10°C is added per packet, packets are shaken and sealed, and every packet and lug is labelled with Production Date, Expiry Date and DC Batch Number
- Ensure finished lugs are stored in the freezer on dunnage racks, never on the floor, and FIFO / FEFO is followed
- Plan daily Smalls production against demand and allocate the correct staffing per line
- Ensure the Yield Tracker is completed daily per batch and per supplier, investigate yields below allocation and escalate deviations immediately
- Ensure partially processed or defrosting product is weighed, labelled RAW and counted as raw material, and close off the yield document at month end
- Ensure Team Leaders complete quality checksheets at the set time slots, investigate all anomalies and sign off all checksheets at the end of every shift
- Conduct planned job observations on cutters and packers against specification
- Assess damaged or non-conforming poultry with the Production Manager and ensure claimed product is isolated, documented and moved to isolated stock
- Ensure product temperatures are probed and recorded every 3 hours and product is kept out of the cold chain for the minimum time
- Ensure the Daily Hygiene Checklist is completed, staff are screened before entering production, and full PPE (including chain mail gloves for cutters) is worn
- Ensure knives are issued, signed for, cleaned and returned daily, colour-coded equipment is used correctly and the daily deep clean is completed to SOP, in line with HACCP and R638
- Supervise, train and motivate the Smalls team, and allocate a dedicated Team Leader to Smalls when producing at or near capacity
- Complete attendance registers daily and manage clocking, leave and absence cover
- Manage performance, discipline and conflict in line with the company disciplinary code
- Submit Smalls production figures for the daily poultry report and escalate non-conformances, maintenance and Health & Safety issues to the Poultry HOD
- Secondary poultry processing - fillets, strips and wings
- Production planning and forecasting
- Production yield management and yield tracking
- Quality control and food safety (HACCP)
- R638 food premises hygiene regulations
- Cold chain and temperature control
- Knife control, PPE and Health & Safety
- MS Office and Sage
REQUIREMENTS:
- Matric (Grade 12)
- Holding, or studying towards, a diploma or degree in Operations Management; a completed degree is preferred
- 2-3 years’ supervisory experience in a poultry production environment
- Extensive exposure to secondary poultry processing, specifically fillets, strips and wings
- 2-3 years’ experience in production planning, forecasting and yield management
- Working knowledge of quality and food safety (HACCP) and R638 (food premises hygiene regulations)
- Able to read and write English
- Computer literacy (MS Office; Sage advantageous)
- No criminal record
- Own transport
- Flexibility to work long hours, weekends and public holidays when required