Foundry Closer

Phakisa
Johannesburg, Gauteng
Full-time
Posted 40 min ago
Full-time Engineering
Apply for this job

Job Description

Job Purpose

  • The Foundry Closer is responsible for preparing, inspecting, assembling and closing mould sections before the molten metal pouring process. The incumbent must ensure that moulds and cores are correctly positioned, accurately aligned and securely fastened to prevent movement, metal leakage or mould failure during pouring.
  • The successful candidate must have practical foundry experience, a strong understanding of mould preparation and closing procedures, and the ability to work safely in a demanding production environment.

Key Responsibilities
Mould Preparation

  • Clean, smooth and inspect mould surfaces and cores before assembly.
  • Repair minor imperfections, loose sand and damaged mould sections.
  • Ensure moulds are free from debris and foreign materials before closing.
  • Verify that moulds meet the required specifications and quality standards.

Core Setting and Alignment

  • Position and align sand or metal cores accurately within mould cavities.
  • Ensure cores are correctly seated and secured to maintain the required internal dimensions and wall thickness.
  • Inspect core positioning to prevent defects during the casting process.
  • Identify and report damaged or incorrectly positioned cores.

Mould Closing and Clamping

  • Assemble and close mould sections, including cope and drag moulds.
  • Secure mould halves using clamps, bolts, wedges, weights or other appropriate fastening equipment.
  • Ensure moulds are properly aligned and sealed to prevent movement, leakage or metal run-outs during pouring.
  • Conduct final inspections before releasing moulds for pouring.

Material Handling and Equipment Operation

  • Handle and move moulds, cores, tools and other foundry materials safely.
  • Use hoists, overhead cranes and forklifts where trained and authorised.
  • Follow production schedules, job cards, work instructions and quality documentation.
  • Maintain accurate records relating to production activities where required.

Pouring Support and Housekeeping

  • Assist the pouring team when required.
  • Ensure moulds are correctly prepared and ready for molten metal pouring.
  • Maintain clean, organised and safe working areas.
  • Follow all foundry safety procedures and wear the required personal protective equipment (PPE).

Minimum Requirements

  • Previous experience working in a foundry or metal casting environment.
  • Practical experience in mould preparation, core setting and mould closing.
  • Knowledge of cope and drag sand moulds.
  • Understanding of mould alignment, clamping and securing procedures.
  • Ability to identify mould defects and correct minor imperfections.
  • Physically fit and able to perform manual handling duties.
  • Ability to follow technical instructions, production schedules and safety procedures.

Technical Skills and Competencies

  • Good understanding of foundry operations and casting processes.
  • Knowledge of sand moulding and core placement.
  • Ability to work accurately and pay attention to detail.
  • Basic understanding of quality control and inspection procedures.
  • Safe handling of foundry tools and equipment.
  • Ability to work independently and as part of a production team.
  • Good communication and problem-solving skills.

Health and Safety Requirements

  • Strict adherence to occupational health and safety regulations.
  • Correct use of PPE, including heat-resistant protective clothing where required.
  • Awareness of hazards associated with molten metal, hot surfaces and heavy moulds.
  • Compliance with lifting and material-handling procedures.
  • Maintain a clean and hazard-free working environment.
  • Immediately report unsafe conditions, equipment defects or incidents.

Key Performance Areas

  • Accurate preparation and inspection of moulds.
  • Correct positioning and alignment of cores.
  • Proper assembly and secure closing of mould sections.
  • Prevention of mould movement, leakage and run-outs.
  • Compliance with production requirements and quality standards.
  • Consistent adherence to foundry safety procedures.

Interested in this role?

You'll apply on Phakisa's own site before 20 December 2026. Put your most relevant experience at the top of your CV first.

Apply Now Get new jobs on WhatsApp

Real employers never ask you to pay to apply. How to spot a job scam

Similar jobs you might like
Food Technologist
Phakisa · Randfontein
MK 19924 - Senior Mechanical Engineer – East Rand
Professional Career Services · Johannesburg
Industrial Engineer
Hello Hired (Pty · Johannesburg
Projects & Design Engineer - Electrical (Power Systems)
Equate Recruitment · Johannesburg
Apply for this job Get new jobs on WhatsApp
Job details
Job TypeFull-time
LocationJohannesburg, Gauteng
CategoryEngineering
Posted20 November 2026
Closing Date20 December 2026
Phakisa
Johannesburg, Gauteng

New to applying?

Free guides on CVs, cover letters, interviews and the Z83 form.

How to apply guides
Apply for this job